PolyPro PPS-PAC Installation Guide download pdf (Page 6)

Figure 2

PUSH DOWN

TO LOCK

PRY OUT

TO UNLOCK

VERIFY GASKET IS

SEATED IN FEMALE

END OF PIPE

MALE

END

FEMALE

END

Figure 3

APPLIANCE CONNECTION: 2" - 4"

1. If the appliance has a PVC/CPVC female

outlet use the Appliance Adapter/ PVC

Adapter and Clamp. (Fig.4)

• If the appliance has a PVC/CPVC

Male outlet use a matching PVC/

CPVC coupling to convert to a

female outlet.

2. If the appliance outlet has a rubber

boot or Fernco-style appliance adapter,

then the PolyPro vent pipe may attach

directly to the appliance (Fig.5).

3. If the appliance has a FasNSeal outlet

then use the FasNSeal to PolyPro

adapter.

6

Figure 5

APPLIANCE

OUTLET

POLYPRO

VENT PIPE

TIGHTEN CLAMPS ON

RUBBER COUPLER

ADAPTER OR FERNCO

STYLE ADAPTER TO

SECURE VENT

PIPE TO APPLIANCE

Figure 4

POLYPRO PIPE

APPLIANCE

ADAPTER CLAMP

APPLIANCE

ADAPTER/PVC

ADAPTER

APPLIANCE

EXHAUST

OUTLET OR

PVC UNION

APPLIANCE

PROJECTION

ADAPTER

LOCKING

BAND

Connecting DuraVent's metal 1738/S636

system to a PolyPro system (Fig.3)

1. Slide locking band onto appropriate

adapter

• Align slot on locking band with

projection on adapter

• Slide locking band past projection

• Rotate Locking Band above

projection so locking mechanism is

opposite projection

2. Slide adapter into PolyPro pipe

3. Lock Locking band to PolyPro

• Ensure locking band is above

projection on pipe

LOCKING BAND

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments